Building Dolphin on Linux

From Dolphin Emulator Wiki
Jump to navigation Jump to search

Binaries for Ubuntu-based distributions only are available on Dolphin's download page. Users running other distros have to build Dolphin from source. Dolphin is compatible with 64 bit and 32 bit (build only) Linux distributions. This is a guide to compiling Dolphin using the cmake build system.

For help on building on Ubuntu-based distros, such as Linux Mint, Elementary OS, Zorin OS, Bodhi Linux, Deepin, Linux Lite, Pinguy OS, Kubuntu, Xubuntu, Lubuntu, Ubuntu GNOME, Edubuntu, Ubuntu Studio or Mythbuntu, see the instructions for Ubuntu below.

Step 1 - Installing the Dependencies

Ubuntu

Follow the steps below only if you like to make your own package or use a specific git commit version. There's a PPA with dolphin already built, easy to use. Note: Ubuntu 16.04 LTS is not supported for development versions.

12.04 (LTS)

Follow this step for Ubuntu 12.04 (LTS).
You need to install a g++ version with C++0x/C++11 support, so install this PPA first:

sudo add-apt-repository ppa:dolphin-emu/gcc-for-dolphin

sudo apt-get update

This PPA will update libstdc++6 package too, which is an important component from the system, so be careful and use at your own risk.

Cmake needs to be updated too:

sudo add-apt-repository ppa:kalakris/cmake

sudo apt-get update

There is no ppa for libevdev-dev, so you will need to build libevdev from source, or disable the evdev backend (cmake .. -DENABLE_EVDEV=OFF -DENABLE_SDL=ON)

Now, install all necessary packages by running the following command:

sudo apt-get install cmake pkg-config git gcc-4.9 g++-4.9 libao-dev libasound2-dev libgl1-mesa-dev libgtk2.0-dev liblzo2-dev libopenal-dev libpulse-dev libreadline-dev libsdl1.2-dev libsoil-dev libxext-dev libxrandr-dev zlib1g-dev libudev-dev

14.04 (LTS)

Follow this step for Ubuntu 14.04 (LTS).
Dolphin needs GCC >= 4.9 now, so install this PPA first:

sudo add-apt-repository ppa:dolphin-emu/gcc-for-dolphin

sudo apt-get update

Install all necessary packages by running the following command (minimum version for Wx is 3.0.1, but trusty repo comes with 3.0.0, so it will build from Externals):

sudo apt-get install cmake pkg-config git gcc-4.9 g++-4.9 libao-dev libasound2-dev libavcodec-dev libavformat-dev libbluetooth-dev libgtk2.0-dev liblzo2-dev libopenal-dev libpulse-dev libreadline-dev libsfml-dev libsoil-dev libswscale-dev libusb-1.0-0-dev libxext-dev libxrandr-dev portaudio19-dev zlib1g-dev libudev-dev libevdev-dev

15.04 and 15.10

Follow this step for Ubuntu 15.04 and future versions (it probably also works on Debian GNU/Linux 8).
Install all necessary packages by running the following command:

sudo apt-get install cmake pkg-config git g++ libao-dev libasound2-dev libavcodec-dev libavformat-dev libbluetooth-dev libenet-dev libgtk2.0-dev liblzo2-dev libminiupnpc-dev libopenal-dev libpolarssl-dev libpulse-dev libreadline-dev libsfml-dev libsoil-dev libsoundtouch-dev libswscale-dev libusb-1.0-0-dev libwxbase3.0-dev libwxgtk3.0-dev libxext-dev libxrandr-dev portaudio19-dev zlib1g-dev libudev-dev libevdev-dev

Fedora

Fedora 23

These dependencies must be installed.

dnf install cmake git gcc-c++ libXext-devel libgudev gtk+-devel wxGTK-devel systemd-devel openal-soft-devel libevdev-devel

These dependencies are optional, but as noted below if you want full features you'll want to install them too.

dnf install libao-devel SOIL-devel libXrandr-devel pulseaudio-libs-devel bluez-libs-devel libusb-devel

These dependencies are best from RPM Fusion and may not be provided in Fedora repos.

dnf install ffmpeg ffmpeg-devel

Other Linux Distributions

If running another distribution, see the build dependencies in Addendum A for a list of packages needed to install.

Step 2 - Get the Dolphin Repository

Install git if it's not already installed:

  • for apt-based distros (eg Ubuntu, Debian, Linux Mint): sudo apt-get install git
  • for rpm-based distros (eg Red Hat, Fedora, SUSE): sudo yum install git
  • for pacman-based distros (eg Arch Linux): sudo pacman -S git

Get a local copy of the dolphin-emu repository:

git clone https://github.com/dolphin-emu/dolphin.git dolphin-emu

Change to the directory created.

cd ./dolphin-emu

To update the local copy in the future without repeating the whole process, run git pull origin within the dolphin-emu directory and proceed to the following steps.

Step 3 - Building Dolphin

Create a build subdirectory, and change into it. The name Build is used in this example.

mkdir Build && cd Build

Configure the build.

cmake ..

If you are using a different gcc version (4.9 on Ubuntu 14.04 for example), you'll need to overwrite some flags:

CC=gcc-4.9 CXX=g++-4.9 cmake ..

You can compile with clang too:

CC=clang CXX=clang++ CXXFLAGS+=-stdlib=libc++ LDFLAGS+=-lc++ cmake ..

Note that you will have to add libc++-dev as dependence in this case. Clang minimum version is 3.4. Use SFML from Externals/, otherwise you'll get some undefined references.

Optionally you can change the install prefix by adding "-D CMAKE_INSTALL_PREFIX=/new/path". Note that this path does not need to be absolute. cmake will complete it to its absolute equivalent. The default prefix is "/usr". This means that the executable will be installed as "/usr/bin/dolphin-emu", the plugins will be installed into "/usr/lib/dolphin-emu", and the shared data files will be installed into "/usr/share/dolphin-emu".

From here build and install in the standard make way.

make

sudo make install

Note that superuser privileges are needed for make install.

To have the "local" build setup from the deprecated scons build configure the build with the following command.

cmake -Dbindir=../Binary/Linux -Ddatadir=../Binary/Linux ..

Step 4 - Run Dolphin!

Run Dolphin by executing:

dolphin-emu

The same action can be done graphically from within some desktop environments, such as Unity's Dash menu on Ubuntu.
If the prefix was changed in step 3 and $prefix/bin is not in the path, then precede this with the path to the executable.

FAQ

  • Where can I get help?

Go to the forums. Lots of Dolphin users use Linux, and they are very experienced with this process.

  • My build failed, but I did nothing wrong!

Most of the time, any problems in the build process are due to user error. It's understandable, it is a complicated process and can be quite daunting for a first timer. But sometimes even with everything right, triple checked, and it's still not working. It's rare, but sometimes a build will just be bugged. But many of Dolphin devs are Linux users, so just wait a day or so, and it will be sorted out.

  • I want a PKGBUILD!

Here is a PKGBUILD for the stable branch. For the master branch, see this PKGBUILD (in pkgver=4.0.rxxxx.7222eb1 replace "xxxx" with the number of the desired revision). Other PKGBUILDs can be found on the Arch User Repository.

Addendum A

This addendum lists the dependencies to build Dolphin.

Build Dependencies

These packages must be installed before building Dolphin.

  • git
  • cmake
  • gcc
  • libwxbase3.0-dev
  • libwxgtk3.0-dev
  • libgtk2.0-dev
  • libxext-dev
  • libreadline-dev
  • libgl1-mesa-dev
  • libevdev-dev
  • libudev-dev

Optional dependencies

Package Service
libasound-dev for alsa sound backend
libpulse-dev for pulseaudio sound backend
libao-dev for ao sound backend
libopenal-dev for openal sound backend
libavcodec-dev for dumping frames in AVI format
libavformat-dev for dumping frames in AVI format
libswscale-dev for dumping frames in AVI format
libenet-dev (>= 1.3.12) if not found will be built statically
liblzo2-dev (>= 2.04) if not found will be built statically
libminiupnpc-dev (>= 1.8) if not found will be built statically
libpolarssl-dev (>= 1.3.8) if not found will be built statically
libsoil-dev if not found will be built statically
libsoundtouch-dev (>= 1.8.1) if not found will be built statically
libsfml-dev (>= 2.1) if not found will be built statically
libusb-1.0-0-dev (>= 1.0.19) if not found will be built statically
libbluetooth-dev for real Wii Remotes
libxrandr-dev for switching desktop resolution in fullscreen mode

Addendum B

Scripts for building Dolphin.

General purpose script

This script checks for Dolphin's source code, downloads it or updates it, then compiles it and finally installs it. It is somewhat interactive and distro-independent.
It will not install any of the dependencies listed above, and will fail if any of them are missing. Install manually as described at the first step.
Licence: GNU General Public Licence v2 or (at your option) any later version of the GPL.

#!/bin/bash

DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
getdolphin() {
	echo 'Downloading Dolphin...'
	git clone https://github.com/dolphin-emu/dolphin.git
}
updatedolphin() {
	cd $DIR/dolphin
	echo 'Updating the local repository...'
	git pull origin
}
build() {
	cmake $DIR/dolphin
	make
}
updatedolphin || getdolphin
mkdir $DIR/build
cd $DIR/build
build && echo 'Compiled successfully.' || exit
echo 'Proceeding to the installation; press Enter to continue or Ctrl+C to cancel.'
read
if [ $(whoami) == "root"];
	then
		make install
	else
		sudo make install
fi

Instructions:

Put this script in any directory, preferably a subdirectory of the Home directory, such as ~/.scripts/dolphin
Within this directory, the script will create two subdirectories, dolphin-emu and build. It must remain in this directory to work.
Execute the script from anywhere, by running sh /path/to/the/script.sh, where /path/to/the/script.sh is replaced with the actual path to the script.
The script will download Dolphin's source, or update it if it has already been downloaded once. After building it, the script will install it. This requires root privileges. After the installation, the script exits, and Dolphin can be used. Note that the process is very fast and simple after the first time. Using a bash alias to execute the script by running a custom command such as dolphin-update is recommended.