Difference between revisions of "NAND Usage Guide"

From Dolphin Emulator Wiki
Jump to: navigation, search
(Extracting NAND files on Windows: Cleanup to writing)
m (Placing the NAND files into Dolphin: minor tweaks to wording)
Line 58: Line 58:
 
=== Placing the NAND files into Dolphin ===
 
=== Placing the NAND files into Dolphin ===
 
# Dolphin versions before {{revision|5.0-4416}} can't take the original '''SYSCONF''' file from real consoles, it has its own specially made SYSCONF file in <var>\Wii\shared2\sys\</var>. Use it to overwrite on top of the original SYSCONF file in <var>\nand\shared2\sys\</var> (under NAND tools' working directory).
 
# Dolphin versions before {{revision|5.0-4416}} can't take the original '''SYSCONF''' file from real consoles, it has its own specially made SYSCONF file in <var>\Wii\shared2\sys\</var>. Use it to overwrite on top of the original SYSCONF file in <var>\nand\shared2\sys\</var> (under NAND tools' working directory).
# Finally, place everything from <var>\nand\</var> into the <var>\Wii\</var> subdirectory.
+
# Finally, place everything from inside <var>\nand\</var> into the <var>\Wii\</var> subdirectory.
  
 
[[Category:Tutorials]]
 
[[Category:Tutorials]]

Revision as of 05:40, 23 September 2020

NAND Flash Memory is the built in memory of the Wii console. It houses save data, downloaded channels, and the Wii Menu. Some games may require files only found in a full NAND dump to work correctly. The easiest way to do that is with BootMii. For alternate methods, see the forum thread.

Dumping NAND with BootMii

BootMii Dumping

To dump NAND with BootMii, you'll need:

  • A homebrewed console with BootMii installed
  • A SD card

Access BootMii through the Homebrew Channel. Use a GameCube Controller or the Power and Reset buttons to navigate through the BootMii menus, as detailed here. Select Options (gears icon) on the far right. Select Backup NAND (Green arrow from chip to the SD card), and wait until it completes. Once completed, remove the SD card and put it into your system. You should see a file named nand.bin on the SD Card. If you do, your NAND has been backed up.

Automatic Import with Dolphin 5.0-3416 or newer

Select Tools > Import BootMii NAND Backup. Dolphin will decrypt and unpack the NAND. Device credentials and system files required for network services emulation will also be extracted automatically.

Manual Import

Note that the manual imported NAND do not work with Wiimmfi; for that, you must follow the instructions above (Automatic Import) instead. If your Dolphin version is too old to have that option yet, update to a newer one.

Extracting NAND files on Linux

  1. Extract the AES IV from keys.bin: dd if=keys.bin of=aes-iv bs=1 skip=360 count=16
  2. Extract the per-console NAND key from keys.bin: dd if=keys.bin of=nand-key bs=1 skip=376 count=16
  3. Decrypt the NAND image: openssl enc -d -aes-128-cbc -in nand.bin -out nand-decrypted.bin -K $(hexdump -v -e '/1 "%02X"' < nand-key) -iv $(hexdump -v -e '/1 "%02X"' < aes-iv) -nopad
  4. Unpack the decrypted NAND image using zestig. The zestig source code can be downloaded from here.

Extracting NAND files on Windows

Use NAND Tools to extract the files from nand.bin. This package includes the following:

  • cmd.lnk
  • nand-aes-dump.c
  • nand-aes-dump.exe
  • NAND-bin2raw.exe
  • zestig.exe

Place the files nand.bin and keys.bin that you've acquired from the last section into the working directory, open cmd.lnk (A shortcut file that will open a command prompt in the current directory), and then type the following commands into the prompt:

Step # Command Description
1 nand-aes-dump.exe Extracts the AES key from your nand.bin into a file called nand-key.bin.
2 NAND-bin2raw.exe nand.bin nand_dec.bin Performs decryption on nand.bin, and writes the output to a file named nand_dec.bin
  • The command prompt window will appear silent. This may take a while depending on your storage performance.
3 zestig.exe nand-key.bin nand_dec.bin nand Extracts everything from nand_dec.bin and places it into a new folder called "nand".
4 exit Closes your command prompt.

After this is finished, a new folder \nand\ should be created in the working directory.

Placing the NAND files into Dolphin

  1. Dolphin versions before 5.0-4416 can't take the original SYSCONF file from real consoles, it has its own specially made SYSCONF file in \Wii\shared2\sys\. Use it to overwrite on top of the original SYSCONF file in \nand\shared2\sys\ (under NAND tools' working directory).
  2. Finally, place everything from inside \nand\ into the \Wii\ subdirectory.