Progress Continues
We've already had 21453 updates since Dolphin 5.0. Keep up with Dolphin's continuing progress through the Dolphin Blog: August, September, and October 2023 Progress Report. |
The Dolphin Emulator Wiki needs your help! Dolphin can play thousands of games, and changes are happening all the time. Help us keep up! Join in and help us make this the best resource for Dolphin. |
NAND Usage Guide
NAND Flash Memory is the built in memory of the Wii console. It houses save data, downloaded channels, and the System Menu. Some games may require files only found in a full NAND dump to work correctly. The easiest way to do that is with BootMii. For alternate methods, see the forum thread.
Dumping NAND with BootMii
To dump NAND with BootMii, you'll need:
- A homebrewed console with BootMii installed
- A SD card
Access BootMii through the Homebrew Channel. Use a GameCube Controller or the Power and Reset buttons to navigate through the BootMii menus, as detailed here. Select Options (gears icon) on the far right. Select Backup NAND (Green arrow from chip to the SD card), and wait until it completes. Once completed, remove the SD card and put it into your system. You should see a file named nand.bin on the SD Card. If you do, your NAND has been backed up.
Extracting NAND files
Use NAND Tools consisting of the followings to extract the files from NAND.bin:
- cmd.lnk
- nand-aes-dump.c
- nand-aes-dump.exe
- NAND-bin2raw.exe
- zestig.exe
Firstly, you will need to copy "nand.bin" and "keys.bin" into the same directory as where the NAND tools are, and then open cmd.lnk (A shortcut file that will open %windir%\system32\cmd.exe into shortcut's current directory) then do the followings:
Step # | What to type into Command Prompt (and then press [Enter]) | Result |
---|---|---|
1 | nand-aes-dump.exe | It will extract your AES key from your nand.bin into a file called nand-key.bin. |
2 | NAND-bin2raw.exe nand.bin nand_dec.bin | It will start the decrypting process and you should now have 2 bin files: encrypted and decrypted nand dump. |
3 | zestig.exe nand-key.bin nand_dec.bin nand | It will extract everything from nand_dec.bin and place them into a new folder called "nand". |
4 | exit | It will close command prompt. |
Now you have your nand backup ready for dolphin!
Placing the NAND files into Dolphin
Make sure to back up any Dolphin files you wish, then place everything from nand\ (the folder you have created with NAND tools) into the User\Wii\ subdirectory. DO NOT replace the User\Wii\shared2\sys\SYSCONF file. Dolphin has its own, unique SYSCONF file, and overwriting it with the one from your NAND dump will confuse Dolphin.
Help
For help and further instructions, ask on the forums.