63
edits
Techydude3 (talk | contribs) (Added link to Xlink Kai instructions. Also changed formatting.) |
(→Linux: Add instruction for NetworkManager (tested 2022-01-02)) |
||
Line 88: | Line 88: | ||
NOTE: There is no encryption for the tunnel. Read the [https://community.openvpn.net/openvpn/wiki/Openvpn23ManPage OpenVPN manpage] for setting up the tunnel with encryption and/or authentication. | NOTE: There is no encryption for the tunnel. Read the [https://community.openvpn.net/openvpn/wiki/Openvpn23ManPage OpenVPN manpage] for setting up the tunnel with encryption and/or authentication. | ||
=== Linux NetworkManager === | |||
This will create a permanent bridge with your Dolphin tun and Ethernet devices. Replace ''eth0'' with your actual network interface. | |||
<pre> | |||
nmcli connection add ifname br0 type bridge con-name br0 bridge.stp no | |||
nmcli connection add type tun ifname Dolphin0 con-name Dolphin0 slave-type bridge master br0 mode tap owner `id -u` group `id -g` 802-3-ethernet.accept-all-mac-addresses true | |||
nmcli connection add type bridge-slave ifname eth0 master br0 | |||
nmcli connection up br0 # will not activate if eth0 is currently used | |||
</pre> | |||
Now deactivate the active connection (usually something called "Wired connection 1") and the bridge will complete. | |||
=== MacOS === | === MacOS === |