USB Passthrough

From Dolphin Emulator Wiki
Revision as of 00:22, 19 March 2024 by Mbc07 (talk | contribs) (Undo revision 188680 by DandelionSprout (That's a guide page, not a regular game page. The Problems template logic currently doesn't handle that, messing up with some of the hidden maintenance categories))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Since 4.0.2, Dolphin has the ability to passthrough USB HID devices designed for use with Wii software. 5.0-2352 enables USB passthrough for all devices. This gives emulated Wii software full control of a hardware device connected to your PC. This is very useful for devices not currently emulated by Dolphin and games that highly depend on extra hardware.

List of Wii Devices and IDs

Some of these currently show up as "Unknown" in the Settings dialog but it does not affect functionality. You can use them anyway.

Device VID PID Type Compatibility
Wii LAN Adapter (RVL-015) 0B95 7720 ? Unsupported, Wii networking is emulated using the host's default network connection
Headbanger Chat Headset 0E6F 010B ? ?
Disney Infinity Reader (Portal Device) 0129 HID Supported. Can also be emulated since 5.0-19334.
EA Active Dongle 21A4 AC40 Supported
Logitech Vantage USB Microphone 046D 0A03 OH0/VEN
Logitech Speed Force Wireless 046D C29C ?
Harmonix Guitar Controller for Nintendo Wii 1BAD 0004 HID
Rock Band Drum Set 3110
Harmonix Drum Controller for Nintendo Wii 3138
Harmonix RB3 Keyboard for Nintendo Wii 3330
Harmonix RB3 MIDI Keyboard Interface for Nintendo Wii 3338
Harmonix RB3 Mustang Guitar for Nintendo Wii 3430
Harmonix RB3 MIDI Guitar Interface for Nintendo Wii 3538
Skylanders Giants Portal 1430 0150
Skylanders Swap Force Portal
Skylanders Wireless Receiver for Wii
Tony Hawk Ride/Shred Skateboard 0100
Wii Speak (RVL-029) 057E 0308 OH0
Ubisoft Camera 030A VEN
Internal Bluetooth Module 0305 OH1 See Bluetooth Passthrough
Cyberbike Adapter N/A The adapter connects as a Wii Remote via Bluetooth. It does not need USB Passthrough. The USB connector is only used for power.

Setting up


Linux support does not require any special drivers. However, a udev rule must be created to allow access to the devices. Note, the Vendor ID and Product ID SHOULD be verified from the device itself before creating the rule.

1. Paste the following into /etc/udev/rules.d/52-dolphin.rules (/lib/udev/rules.d/52-dolphin.rules if making a package). Do not forget to replace the XXXX with the appropriate Vendor and Product IDs.

SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="XXXX", ATTRS{idProduct}=="XXXX", MODE="0666"

2. Reload udev rules with: sudo udevadm control --reload-rules

3. Reinsert the accessory.


For users wishing to use the USB Microphone, USB Camera, or Wii Speak, it is highly recommended to use 5.0-10617 or newer. It contains important fixes to both libusb and Dolphin that fix crashes and fix support in devices across many games.

Install Dedicated Driver

Single Interface Devices

Download and open Zadig, then:

1. In the "Options" menu in Zadig, make sure "List All Devices" is enabled.

2. Look through the devices for the device to passthrough.

3. On the right column, select "libusbk" then click "Replace Driver". Select "Yes" to modify the system driver.

Multi Interface Devices

For Microphone, Wii Speak, and USB Camera Passthrough, installing over the composite parent device is required.

Download and open Zadig, then:

1. In the "Options" menu in Zadig, make sure "List All Devices" is enabled and "Ignore Hubs or Composite Parents" is disabled.

2. Look through the composite parent of the device you wish to passthrough.

3. On the right column, select "libusbk" then click "Replace Driver". It may warn you that you're modifying a kernel driver, but, this is normal. Select "Yes" to modify the kernel driver.

Uninstalling Dedicated Driver

If for some reason you wish to restore the default driver to the device, open up "Device Manager." In the last, expand "libusbK devices" and find the device you wish to restore. Uninstall the device, then unplug the device and plug it back in. It will now be restored to its original state.

If you were using the WinUSB driver, the device will be located under "Universal Serial Bus Devices" instead, but the instructions are identical otherwise.

usbdk driver

usbdk is no longer supported nor recommended. While it provides the ability to simply install a driver without any further instructions, usbdk suffers severe instability issues. For legacy purposes, you can still use the x64 usbdk driver in older builds.


While this can be done in macOS, there is currently no easy to use guide for it. A modified variant of the Native GameCube Adapter for Wii U guide should work, but what needs to be changed is not immediately apparent.


This feature is not supported on Android.

Configuring Dolphin

In 5.0-2352, an additional step was added for USB Passthrough. Because some devices being plugged into your computer can potentially hang or crash a game, you now must whitelist the emulated Wii so it can access this device. This is not required for Bluetooth Passthrough.

Guide to Whitelist a USB Device in Dolphin

1. Open Dolphin's configuration dialog.

2. Click on the Wii tab.

3. In the "Whitelisted USB passthrough devices", click on the "Add..." button.

4. Select the device you wish to passthrough.