Wii Remote Plus (RVL-CNT-01-TR) Connection Guide: Difference between revisions

== Forcing the Toshiba Drivers onto the Adapter ==

If your adapter isn't detected by the Toshiba stack and shows endless "Please plug in the Bluetooth device and click OK button" prompts, you can hack the Toshiba Stack to get around it. Basically, the Toshiba Stack will only install itself onto adapters it ''knows'' will work, and it knows because it has a list of USB\VID numbers. It will only install the Toshiba Stack drivers onto devices on this list. But, with only a little tweaking, you can add yours.

#Make sure the Toshiba Stack is installed (even if it is not detected by the Toshiba stack) and that your Bluetooth adapter is plugged in.

#Open the Device Manager and find your Bluetooth device. It will either show up as a Bluetooth radio or as an unknown device.

#Once it has completed, there will be a delay. Then the bluetooth assistant will pop up and ask you to turn on bluetooth devices. Ignore it, and close it.

#In the notification icons (right hand side of the taskbar near the clock) there will now be a blue and red bluetooth icon. Double click it. Click the "New Connection" button. If the wizard appears, then the Toshiba Stack has successfully installed the Toshiba drivers to your bluetooth adapter. If a prompt appears saying "Bluetooth is not ready" ...then it failed. Once you reach this point, there is no way known to deal with this.

Follow the Windows 7 guide. If you modify <tt>tosrfusb.inf</tt> and the Toshiba Stack still can't install drivers to your bluetooth adapter, do the following.

#Click on update driver, browse on computer, select let me pick option, and select the driver that says it is not digitally signed. (this is what you want)

#After that you should be done. If it works, you should be able to proceed with the [[#Connecting the Wii Remote Plus|Connecting the Wii Remote Plus]].

= Linux =