1
edit
Progress Continues
We've already had 21666 updates since Dolphin 5.0. Keep up with Dolphin's continuing progress through the Dolphin Blog: February, March, and April 2024 Dolphin Progress Report. |
The Dolphin Emulator Wiki needs your help! Dolphin can play thousands of games, and changes are happening all the time. Help us keep up! Join in and help us make this the best resource for Dolphin. |
No edit summary |
m (fix line errors) |
||
Line 2: | Line 2: | ||
To initialize | To initialize | ||
You will need: | |||
-Dolphin 4.0-4594 or later | |||
-Official Wii U GameCube Adapter | |||
-A Gamecube Controller | |||
== Linux == | == Linux == | ||
Line 13: | Line 21: | ||
=== Driver installation === | === Driver installation === | ||
If you would like to use Dolphin's in-built driver, uninstall the vJoy drivers and unplug the GC adapter. | If you would like to use Dolphin's in-built driver, uninstall the vJoy drivers and unplug the GC adapter. | ||
1. Close Dolphin if it is running. | 1. Close Dolphin if it is running. | ||
2. Plug in the GC adapter. | 2. Plug in the GC adapter. | ||
3. Download Zadig and start it up. | 3. Download Zadig and start it up. | ||
4. From the "Options" menu in Zadig, select "List All Devices" | 4. From the "Options" menu in Zadig, select "List All Devices" | ||
5. In the pulldown menu, select "WUP-028". | 5. In the pulldown menu, select "WUP-028". | ||
6. Check that the driver on the left says "HidUsb" and the USB ID is "057E 0337". If it doesn't, follow the driver removal instructions below. | 6. Check that the driver on the left says "HidUsb" and the USB ID is "057E 0337". If it doesn't, follow the driver removal instructions below. | ||
7. If it is, on the right hand side, select "WinUSB" | 7. If it is, on the right hand side, select "WinUSB" | ||
8. Click "Replace Driver" | 8. Click "Replace Driver" | ||
9. Select "Yes" to modify the system driver | 9. Select "Yes" to modify the system driver | ||
10. Press Close at the prompt | 10. Press Close at the prompt | ||
11. Close Zadig | 11. Close Zadig | ||
12. Start up Dolphin | 12. Start up Dolphin | ||
13. In the "Controller settings", under "GameCube Adapter", it should have the option of "Direct Connect" checked. Check it if it is unchecked. | 13. In the "Controller settings", under "GameCube Adapter", it should have the option of "Direct Connect" checked. Check it if it is unchecked. | ||
14. If it does, select "Standard Controller" (or TaruKonga/bongos) in the ports that you have a GC pad plugged into. | 14. If it does, select "Standard Controller" (or TaruKonga/bongos) in the ports that you have a GC pad plugged into. | ||
15. Press "OK" on the "Controller settings" and start a game. | 15. Press "OK" on the "Controller settings" and start a game. | ||
edit