Configuring Controllers: Difference between revisions

Jump to navigation Jump to search
m (Ooops)
(→‎Real Wiimote: Asked Billiard. Since real wiimote scanning was merged, it is the same on all OSes. Billiard told me of a quirk that I didn't notice in continuous scanning, updated that too.)
Line 40: Line 40:
Select '''Real Remote''' in the dropdown for a Wiimote slot. Dolphin supports up to 4 Real Wiimotes at once, along with any peripherals you have attached to them.
Select '''Real Remote''' in the dropdown for a Wiimote slot. Dolphin supports up to 4 Real Wiimotes at once, along with any peripherals you have attached to them.


* On Windows: to connect a Real Wiimote, press '''Refresh''' then press the "1" and "2" buttons on your wiimote simultaneously. If '''Continuous Scanning''' is enabled, there is no need to open the window and press refresh every time, just press the "1" and "2" buttons simultaneously and it will connect at any point in Dolphin.
* To connect a Real Wiimote, press '''Refresh''' then press the "1" and "2" buttons on your Wiimote simultaneously. If '''Continuous Scanning''' is enabled, there is no need to press refresh every time: just press the "1" and "2" buttons simultaneously after the game is running or when the Wiimote window is open. Real Wiimote connectivity will only work if one of the Wiimotes is set to "Real Wiimote" or "Hybrid Wiimote".
* On Linux there is no need for a '''Pair up''' button. Just press the "1" and "2" buttons on your wiimote simultaneously. Your Wiimote will shake to confirm it is connected. Press '''refresh''' if the connection did not succeed the first time. Alternatively you can connect the controller just before starting a game by pressing "1" and "2".


If '''Enable Speaker Data''' is enabled, the wiimote speaker can produce sound. If disabled, it cannot. Some games, like [[Metroid Prime 3]], have lag issues when Enable Speaker Data is enabled.
If '''Enable Speaker Data''' is enabled, the wiimote speaker can produce sound. If disabled, it cannot. Some games, like [[Metroid Prime 3]], have lag issues when Enable Speaker Data is enabled.


'''Continuous Scanning''' allows you to connect a Wiimote without having to open the Wiimote window and press refresh. As long as Dolphin is running, just press "1" and "2" on your wiimote simultaneously and it will connect in any window, even with a game running.
'''Continuous Scanning''' allows you to connect a Wiimote without having to open the Wiimote window and press refresh every time. As long as a game is running or the Wiimote configuration window is up, just press "1" and "2" on your wiimote simultaneously and it will connect.


'''Sensor Bar Position''', '''IR Sensitivity''', '''Speaker Volume''', and '''Wiimote Motor''' are duplicates of Wii settings. They do exactly what they say they do, and work exactly like the same settings on the Wii itself.
'''Sensor Bar Position''', '''IR Sensitivity''', '''Speaker Volume''', and '''Wiimote Motor''' are duplicates of Wii settings. They do exactly what they say they do, and work exactly like the same settings on the Wii itself.
Retrieved from "https://wiki.dolphin-emu.org/index.php?title=Configuring_Controllers"