Broadband Adapter
The Nintendo GameCube Broadband Adapter (BBA) and the Nintendo GameCube Modem Adapter are a network adapter and 56k dial-up modem, respectively, for the Nintendo GameCube. They were produced by Conexant and made in the Philippines. The adapters fit flush into "Serial Port 1" on the underside of the GameCube and add an Ethernet port or telephone port to the side of the console, allowing the console to communicate with other consoles through a network.
Developer | Nintendo |
---|---|
Type | Video game console add-on |
As of 3.0-732, Dolphin's main branch has BBA emulation support. However, it requires a Virtual Private Network (VPN) in order to function. BBA emulation is not supported on OS X.
Games with BBA/Modem Support
Title | Online/LAN Play |
---|---|
Homeland | Online |
Phantasy Star Online Episode I & II • Trial Edition (Modem Only) | Online |
Phantasy Star Online Episode I & II Plus | Online |
Phantasy Star Online Episode III: C.A.R.D. Revolution • Trial Edition | Online |
Mario Kart: Double Dash‼ | LAN |
1080° Avalanche | LAN |
Kirby Air Ride | LAN |
How to use the BroadBand Adapter
Windows
- Install OpenVPN TAP Adapter V9, included in the OpenVPN installer: OpenVPN download page
- Go to start menu. Click TAP-Windows and then click Utilities. Right click Add a new TAP virtual ethernet adapter and run it as administrator. It will complete in a few seconds.
- In Control Panel\Network and Sharing Center\Change adapter settings, select the TAP device and the adapter you use to connect to the internet.
- Right-click and select Bridge Connections.
Linux
Install OpenVPN from your distribution package manager, then run the following commands (as root) to create the virtual interface and bridge it to your physical Ethernet adapter:
openvpn --mktun --dev Dolphin --dev-type tap --user john --group doe # john:doe will be running the emulator brctl addbr br0 brctl addif br0 Dolphin brctl addif br0 eth0 # or whatever your network interface is ip l set Dolphin up ip l set Dolphin promisc on
You'll also need to change your network settings to configure IP/gateway on br0 instead of the real adapter. The IP address of the real adapter must be set to 0.0.0.0. Linux doesn't support adding a wireless interface to a bridge as of July 2012 so you need a wired NIC for that to work.
In case you still want to use a wifi network for connecting, there is the option to create another tunnel-interface over a UDP connection across the wifi network:
openvpn --dev tap-dolphin --port 2626 --remote otherIP --local thisIP --ping 10 --ping-exit 60 --daemon
The created interface tap-dolphin can then be used to add to the br0 bridge instead of eth0.
NOTE that there is no encryption for the tunnel. Read the openvpn manpage for setting up the tunnel with encryption and/or authentication.
Configure Dolphin
Config -> Gamecube -> SP1, select BBA.
Now you may play any games which use the BBA.