| Progress Continues
We've already had 10049 updates since Dolphin 5.0. Keep up with Dolphin's continuing progress through the Dolphin Blog: Dec/Jan Progress Report.
| The Dolphin Emulator Wiki needs your help!
Dolphin can play thousands of games, and changes are happening all the time. Help us keep up! Join in and help us make this the best resource for Dolphin.
NAND Usage Guide
NAND Flash Memory is the built in memory of the Wii console. It houses save data, downloaded channels, and the Wii Menu. Some games may require files only found in a full NAND dump to work correctly. The easiest way to do that is with BootMii. For alternate methods, see the forum thread.
Dumping NAND with BootMii
To dump NAND with BootMii, you'll need:
- A homebrewed console with BootMii installed
- A SD card
Access BootMii through the Homebrew Channel. Use a GameCube Controller or the Power and Reset buttons to navigate through the BootMii menus, as detailed here. Select Options (gears icon) on the far right. Select Backup NAND (Green arrow from chip to the SD card), and wait until it completes. Once completed, remove the SD card and put it into your system. You should see a file named nand.bin on the SD Card. If you do, your NAND has been backed up.
Automatic Import with Dolphin 5.0-3416 or newer
Select Tools > Import BootMii NAND Backup. Dolphin will decrypt and unpack the NAND. Device credentials and system files required for network services emulation will also be extracted automatically.
Extracting NAND files on Linux
- Extract the AES IV from keys.bin:
dd if=keys.bin of=aes-iv bs=1 skip=360 count=16
- Extract the per-console NAND key from keys.bin.
- Decrypt the NAND image:
openssl enc -d -aes-128-cbc -in nand.bin -out nand-decrypted.bin -K $(hexdump -v -e '/1 "%02X"' < nand-key) -iv $(hexdump -v -e '/1 "%02X"' < aes-iv) -nopad
- Unpack the decrypted NAND image using zestig.
Extracting NAND files on Windows
Use NAND Tools consisting of the followings to extract the files from nand.bin:
Place nand.bin and keys.bin you've acquired from the last section into the working directory, then open cmd.lnk (A shortcut file that will open %windir%\system32\cmd.exe into shortcut's current directory) then do the required steps:
|Step #||Code to enter||Explanation|
|1||nand-aes-dump.exe||It will extract your AES key from your nand.bin into a file called nand-key.bin.|
|2||NAND-bin2raw.exe nand.bin nand_dec.bin|| It will start the decrypting process and you should now have 2 bin files: encrypted and decrypted nand dump.
|3||zestig.exe nand-key.bin nand_dec.bin nand||It will extract everything from nand_dec.bin and place them into a new folder called "nand".|
|4||exit||It will close command prompt.|
The new folder \nand\ will be created in the working directory.
Placing the NAND files into Dolphin
- Unless you're using or newer, SYSCONF files from real consoles can lack some sections that Dolphin versions earlier than can't handle correctly. Dolphin has its own, unique SYSCONF file from \Wii\shared2\sys\. Use it to overwrite on top of your console's SYSCONF file in \nand\shared2\sys\ (under NAND tools' working directory).
- Finally, place everything from \nand\ into the \Wii\ subdirectory.